Condensate treatment in detail:
BEKOSPLIT and QWIK-PURE compared
When compressed air is generated with oil-injected compressors, an oil-water condensate is inevitably produced, which must not enter the sewer system untreated. For legally compliant and economical treatment, BEKO TECHNOLOGIES has developed two different systems: BEKOSPLIT and QWIK-PURE. Both are DIBt-approved, but differ significantly in how they work and in their ideal field of application.

BEKOSPLIT
Chemical-physical treatment for stable emulsions
BEKOSPLIT is used when dealing with so-called stable emulsions. These mixtures of oil and water are so finely combined that they can hardly be separated by purely physical methods. The BEKOSPLIT process therefore works chemically and physically. A special mineral-based reaction agent is added to the condensate, which breaks up the emulsion and binds the oil and solid particles. This creates flocs that enclose both oil and dirt particles. These flocs settle and can then be separated from the cleaned water. The result is a water quality that meets the legal requirements and can be safely discharged into the sewer system. This process is reliable and robust, especially with problematic condensates that are difficult to separate.

QWIK-PURE
Active separation with compressed air
QWIK-PURE, the world’s first active oil-water separator, works quite differently. Instead of chemical reactions, it relies on a purely physical process assisted by short bursts of compressed air. The condensate first enters a pre-filter before being actively forced through the filter units with the help of compressed air. These pulses prevent the filter from clogging and ensure an even flow. In the main filter, the oil components are effectively retained while the cleaned water flows through. The process is controlled by intelligent Flow-Rate-Control, which automatically adapts operation to varying volumes and loads. This makes QWIK-PURE particularly suitable for unstable condensates or applications in which oil and water quantities fluctuate greatly.
BEKOSPLIT and QWIK-PURE compared
A direct comparison shows that BEKOSPLIT stands out for its ability to reliably break down stable emulsions, while QWIK-PURE, with its active separation technology, is particularly flexible and compact in use. Which solution is right always depends on the specific type of condensate at your site.
| System | BEKOSPLIT | QWIK-PURE |
|---|---|---|
| Process | Chemical-physical with separating agent | Active physical separation using compressed air pulses |
| Suitable for | Stable emulsions, high oil content | Unstable emulsions, fluctuating volumes |
| Advantages | Removes oil + solids, robust, very reliable | Compact, flexibly expandable, self-monitoring |
Laboratory service provides certainty
To provide clarity, BEKO Technologies also offers laboratory analyses. Using condensate samples sent in, it is possible to determine exactly which process delivers the best results – a decisive advantage for operators who rely on solutions that are both legally compliant and economical.
