BEKOMAT condensate drains
The electronically level-controlled condensate drain
Condensate forms at almost every stage of the compressed air treatment process. It usually contains oil, is laden with dirt particles and spreads throughout the entire compressed air network. We help you remove condensate from compressed air and achieve the optimum quality for your application: with the BEKOMAT. The first electronically level-controlled condensate drain has since become synonymous with condensate drainage. Demand-based and with intelligent electronics to prevent compressed air losses, it minimises energy use and costs. Practical experience confirms this.
The requirements for condensate drainage are as individual as the use of the treated compressed air. Our aim is to offer you precisely the optimum solution for your specific application: with our comprehensive range of condensate drains for every compressor output and type, for every system pressure, for all operating conditions – and even for special areas.
Control
capacitive sensor
Protection rating
IP67 (U series)
High pressure
up to PN 63
Vacuum
0.1 to 1.8 bar (abs)
Saving costs in every dimension: BEKOMAT standard units
With the standard units 12, 13, 14 and 16, the BEKOMAT range offers not only the right solution for almost every application, but also the energy-conscious one. The integrated capacitive sensor for demand-based condensate drainage saves resources and increases efficiency – that is the BEKOMAT principle.
Unnecessary costs and damage in compressed air generation can only be avoided efficiently with demand-based condensate drainage. BEKOMAT condensate drains therefore work with a capacitive sensor. The intelligent electronics prevent compressed air losses and minimise energy use. For this reason, electronically controlled condensate drainage often pays for itself within six months compared with units using timer-controlled drain valves.
Robust and reliable
In the standard version, highly corrosion-resistant aluminium ensures the reliability and robustness of the BEKOMAT. A silver paint finish protects its exterior. The BEKOMAT CO models are ideal for oil-free or aggressive condensates. Their housing is additionally fully sandblasted and protected by a high-quality hard coating.
A BEKOMAT for every application
BEKOMAT 20 | 20 FM for filters and water separators
The BEKOMAT20 FM is a robust condensate drain with integrated filter management that monitors the service life of filter elements cost-effectively.
It is suitable for water separators and filters and can be used in systems with both oil-lubricated and oil-free compressors.
The unit has a plastic housing with an internal aluminium condensate reservoir. The front panel can be read and operated from both above and the front.
Condensate drains with service concept – fast and economical
Thanks to their innovative design, the BEKOMAT 31U, 32U, 33U and 33U CO series offers simple and economical maintenance. The units consist of no more than three modules coupled with quick connectors; the control and sensor unit is installed only once, and for maintenance only the service unit (including all wear and pressure parts) is replaced.
A service indicator signals when the service unit is due for replacement. The units, suitable for oil-contaminated and oil-free condensate, are robust, and the housing is IP67 watertight.
BEKOMAT solutions for special requirements
Drawing on many years of experience as a condensate technology specialist, BEKO TECHNOLOGIES has repeatedly developed solutions for its customers’ special requirements, which eventually went into series production. Numerous additional functions have thus been implemented for a wide range of industries, building on the classic advantages of the BEKOMAT . These have proven themselves in many different fields of application – benefit from our unique expertise too.
With unloading valve, specially for high-pressure, multi-stage and turbo compressors
BEKOMAT 03/06/LA/LALP
If the compressor’s operating pressure drops below 1.2 bar (e.g. with multi-stage compressors in the idle phase), an additional valve mounted on the reservoir opens. This allows the condensate to drain even without pressure. Once the operating pressure exceeds 1.2 bar again, the unloading valve closes and the BEKOMAT works in its standard mode.
The LP version is specially designed for operating pressures that can drop to 0.4 bar. High-pressure versions are available for operating pressures up to PN 25 or PN 63 bar.
For use in vacuum systems
BEKOMAT 03/06 VAC
The BEKOMAT VAC condensate drains are specially designed to drain condensate and other media from negative-pressure and vacuum systems with an operating pressure of 0.1 to 1.8 bar (abs). They are also suitable for process engineering operations running below normal atmospheric pressure. This robust, reliable condensate drain was developed and built in a hard-coated version or in stainless steel to meet your specific requirements.
For use with large compressors
BEKOMAT 08/09
The entire housing of this BEKOMAT condensate drain is made of cast stainless steel and is therefore designed for use in aggressive atmospheres and for draining condensates from special gas compression. They are used mainly in oil installations, refineries and the petrochemical industry. These are the largest electronically level-controlled condensate drains on the market, specially developed and built for these requirements.
Which BEKOMAT suits your application?
There are various BEKOMAT models, which differ considerably depending on compressor output and field of application. Let us advise you to find the best model for your needs.
Frequently asked questions
What is a BEKOMAT needed for?
Condensate forms at almost every stage of compressed air treatment, usually containing oil and laden with dirt particles. The BEKOMAT reliably drains this condensate from the compressed air system.
How does level-controlled condensate drainage work?
An integrated capacitive sensor detects the fill level, and the electronics drain the condensate according to the quantity. No compressed air is lost and energy use stays minimal.
Is it worth replacing timer-controlled drain valves?
In many cases, yes. Compared with units using timer-controlled drain valves, electronically controlled condensate drainage often pays for itself within six months.
Which standard units are available?
The range includes the BEKOMAT 12, 13, 14 and 16 standard units for almost every application. For filters and water separators there are the BEKOMAT 20 and 20 FM, plus the 31U, 32U, 33U and 33U CO series.
Is the BEKOMAT also suitable for oil-free or aggressive condensate?
Yes. The CO models are designed for this. Their housing is fully sandblasted and protected by a hard coating.
How much maintenance does the 31U to 33U series require?
Very little. The control and sensor unit stays installed; for maintenance only the service unit with all wear and pressure parts is replaced. A service indicator shows when replacement is due.
What does the BEKOMAT 20 FM offer?
It has integrated filter management that monitors the service life of filter elements. It is suitable for water separators and filters in systems with oil-lubricated and oil-free compressors.
Are there solutions for high pressure, vacuum or large compressors?
Yes. The versions with unloading valve are intended for high-pressure, multi-stage and turbo compressors, with high-pressure versions up to PN 25 or PN 63. The BEKOMAT VAC works in vacuum systems from 0.1 to 1.8 bar (abs), and the cast stainless steel BEKOMAT 08/09 in large compressors.
Can the BEKOMAT be networked?
Yes, with the BEKOMAT i4.0. It adds networking and remote monitoring to the proven function.
Who can help me choose the right model?
We do. The models differ considerably depending on compressor output and field of application, and we find the right one with you. Call us or write to us.
Innovation: BEKOMAT i4.0
The proven BEKOMAT condensate drains have been known for decades for their operational reliability, longevity and easy installation, as well as their efficiency, cost-effectiveness and environmental friendliness. Now we are going a step further and enriching the existing functionality with the advantages and benefits of the digital world. The new BEKOMAT i4.0thus meets the expectations placed on i4.0 systems, such as networking capability, remote monitoring, flexibility and, above all, future-proofing.
