CLEARPOINT 3 eco
Efficient compressed air filtration with minimal energy consumption
Discover CLEARPOINT 3eco, the energy-efficient solution for first-class compressed air filtration. With optimised air flow and high-quality materials, we reduce the differential pressure by up to 50% and cut the residual oil concentration at the outlet tenfold. Rely on our innovative technology and the ECO label.
CLEARPOINT 3eco provides safe and reliable compressed air filtration using the latest material and manufacturing technologies. Our optimised housing design minimises corrosion and maximises efficiency. Thanks to the high separation efficiency, just 3 filtration grades (C, F and S) now meet all requirements. Our 3eco filters have been validated to ISO 12500 by the independent institute IUTA. Enjoy improved compressed air quality while saving on operating costs.
Filtration grades
3 (C, F and S)
Threaded filters
35 to 3,120 m³/h
Flanged filters
1,420 to 34,680 m³/h
Differential pressure
up to 50 % lower
The optimum time to replace filter elements
Electricity costs for commercial businesses have risen sharply in recent years. As a result, the economic service life of compressed air filters has become shorter.
As particles are filtered out of the compressed air, the void volume in the filter element becomes ever smaller, so the differential pressure between filter inlet and outlet rises continuously. To compensate for this difference, the compressor has to generate a higher pressure: this requires additional electrical energy and causes higher operating costs. The filter element should therefore be replaced at the latest when the additional energy costs (or operating costs) exceed the purchase cost of a new element.
By the way: new filter elements also ensure that the required compressed air quality is reliably maintained.
Filter element design
Threaded filters are integrated directly into the compressed air line. This can be immediately after the compressor, at the branch of a separate supply line or directly upstream of an application. Several threaded filters are often combined to reach the desired specification step by step through multi-stage filtration. Threaded filters are available for a wide range of pressure ratings.
Our CLEARPOINT® filters
CLEARPOINT® 3eco threaded filters
Threaded Filter PN16 | PN50
- Efficient filtration between 30% and 130% of the energy-optimised flow rate
- Up to 30% higher flow rate
- Simple, secure and space-saving connection of several filters
- Capacity range from 35 to 3,120 m³/h at 7 bar
CLEARPOINT® 3eco flanged filters
PN 16 flanged filters
- Efficient filtration between 30 % and 111 % for the energy-optimised flow rates
- Corrosion protection through high-temperature galvanising
- Capacity range from 1,420 to 34,680 m³/h at 7 bar
Frequently asked questions
What do I use the CLEARPOINT 3eco for?
For filtering compressed air directly in the line. It can be installed immediately after the compressor, at the branch of a separate supply line or directly upstream of an application.
Which filtration grades are available?
Thanks to the high separation efficiency, three filtration grades meet all requirements: C, F and S. Which grade is right depends on the compressor capacity and the application.
How does the CLEARPOINT 3eco save energy?
Optimised air flow and high-quality materials reduce the differential pressure by up to 50 %. The compressor therefore has to generate less pressure, which saves electricity and operating costs.
Which designs and capacity ranges are available?
Threaded filters PN16 and PN50 cover 35 to 3,120 m³/h at 7 bar. Flanged filters PN 16 cover 1,420 to 34,680 m³/h at 7 bar.
When should I replace the filter elements?
At the latest when the additional energy costs caused by the increased differential pressure exceed the purchase cost of a new element. New elements also ensure the required compressed air quality.
Why do costs rise with an old filter element?
Over time, the void volume in the element clogs and the differential pressure rises. The compressor compensates with higher pressure, which requires additional electrical energy.
Can I combine several filters in series?
Yes. Several threaded filters are often combined to reach the desired specification step by step through multi-stage filtration. The threaded filters can be connected to each other simply, securely and in a space-saving way.
How good is the oil separation?
The residual oil concentration at the outlet falls tenfold. The 3eco filters have been validated to ISO 12500 by the independent institute IUTA.
How are the flanged filters protected against corrosion?
By high-temperature galvanising. In addition, the optimised housing design minimises corrosion.
Who can help me choose the right filter?
We can. We advise you on the right filtration grade and model for your application. Call us or write to us.
Which filtration grade suits your application?
There are various filtration grades and separation efficiencies, which vary depending on compressor capacity and field of application. Let us advise you to find the optimum model for your needs.
