Who benefits most from a Hankison HDI-E refrigeration dryer?
The Hankison HDI-E series pays off above all for companies whose compressed air demand is not constant. That is exactly the norm in most Swiss SMEs. Machines do not run all day at the same load, production processes change, staff take breaks, jobs are set up, and in the evening the system often stays under pressure only because of small leaks.
A cycling refrigeration dryer is therefore particularly attractive for:
- CNC joinery workshops
- metalworking companies
- mechanical engineering companies
- plastics processors
- packaging companies
- food producers
- paint shops
- companies working in shifts
- companies that shut down at night and at weekends
These applications involve many hours at low load. It is precisely in these phases that the HDI-E series can play to its greatest strength: the refrigeration compressor does not simply keep running but, thanks to the cold storage, can switch off completely at times.
The advantage is smaller for systems that run around the clock at an almost constant full load. There are fewer load fluctuations there and therefore fewer opportunities to switch off the refrigeration compressor.
Why the savings do not depend on the dryer alone

The energy savings of a refrigeration dryer always depend on the compressed air system as a whole. Key factors include:
- operating hours per year
- production load profile
- leakage rate
- electricity price
- operating pressure
- ambient temperature
- compressed air inlet temperature
- pressure drop in the dryer
- correct sizing of the unit
The leakage rate in particular is often underestimated. If a system stays under pressure at night and at weekends, this small volume of air also has to be dried. With a conventional refrigeration dryer, this can mean that the refrigeration compressor runs for many hours even though very little compressed air is needed.
The HDI-E series reduces this unnecessary consumption because it uses stored cold and can switch off the refrigeration compressor when demand is low. In addition, a low pressure drop reduces the energy demand of the compressor, as it has to build up less pressure. The manufacturer’s documentation states an average pressure drop of less than 0.2 bar for the cycling dryers.
Cost-effectiveness: the purchase price is not all that counts
When choosing a refrigeration dryer, people often look at the purchase price first. For an economically sound decision, however, the entire life cycle is what matters.
An inexpensive conventional refrigeration dryer can cause considerably higher electricity and service costs over several years. An energy-efficient cycling refrigeration dryer may be more expensive to buy, but it can make up for this difference through lower operating costs.
Cost-effectiveness includes:
- lower electricity costs (self-consumption from a solar installation)
- shorter running time of the refrigeration compressor
- less wear
- zero-loss condensate drainage
- stable pressure dew point
- protection of machines and tools
- fewer faults caused by moisture
- lower rework costs in sensitive applications
In painting processes, CNC machines, pneumatic tools or automated systems in particular, dry compressed air is not just a question of energy but also a decisive quality factor.
Conclusion: the HDI-E series pays off especially when compressed air demand fluctuates
Many companies optimise their compressor but overlook the refrigeration dryer. Yet it is precisely compressed air treatment that can cause unnecessary energy costs over the years.
Conventional refrigeration dryers work reliably but often use electricity unnecessarily at low load. Variable speed refrigeration dryers are more efficient but reach their limits at very low load. The Hankison HDI-E series goes one step further: it stores cold, uses it when demand is low and switches the refrigeration compressor off completely at times.
For Swiss manufacturers with fluctuating compressed air demand, leakage outside working hours or regular production breaks, the HDI-E series can therefore be a very attractive solution economically.
If you want to reduce your compressed air costs in the long term, you should look not only at the compressor but also take a critical look at the refrigeration dryer.
Request a quote now or visit the HDI-E product page
Would you like to know whether a Hankison HDI-E refrigeration dryer pays off for your compressed air system?
We will be happy to review your current situation, the appropriate flow rate and the potential savings. Request a no-obligation quote now or visit our product page on the Hankison HDI-E series.
